Beschreibung
AJ26 is a compact 10000mAh power bank platform with a front TFT display, Type-C input and output, USB-A output, a portable cable loop, and three published color options. For B2B sourcing, the voltage/current profiles below are published product data; protocol support, simultaneous-output behavior, screen functions, material grade, and production tolerances should be confirmed in the approved specification and sample.
AJ26 TFT Screen Power Bank at a Glance
- Published capacity: 10000mAh at 3.85V.
- Charging interfaces: Type-C input/output and USB-A output.
- User interface: front TFT display for battery-status visibility; final screen data and firmware behavior require sample approval.
- Form factor: 97.5 × 40.1 × 31mm with a portable cable-loop design.
- Color options: metallic black, metallic gray, and white.
- OEM-Bestellmengen: 500, 1000, and 2000 pieces, subject to the confirmed quotation and project scope.
Veröffentlichte technische Spezifikationen
| Spezifikation | Published AJ26 Data |
|---|---|
| Artikelnummer | AJ26 Power Bank |
| Capacity | 10000mAh / 3.85V |
| Battery | 263376 |
| Abmessungen | 97.5 × 40.1 × 31mm |
| Material | Flammhemmendes PVC |
| Type-C Input | 5V/2.8A, 9V/2A, 12V/1.5A |
| Type-C Output | 5 V/3 A, 9 V/2,22 A, 12 V/1,67 A |
| USB-A Output | 5V/3A, 9V/2A, 10V/2.25A, 12V/1.5A |
| Color | Metallic Black / Metallic Gray / White |
These are published model specifications, not a substitute for the buyer-approved datasheet. Confirm tolerances, usable capacity, cell configuration, protocol list, and test conditions before mass production.
TFT Display Verification for OEM Projects
The front display is intended to make battery status visible at a glance. Buyers should confirm the exact data shown, update interval, displayed-value accuracy, brightness, viewing angle, standby behavior, firmware version, and whether any interface customization is available. Approval should be based on the production-intent sample rather than marketing artwork alone.
Type-C and USB-A Charging Profiles
The published table lists Type-C input profiles up to 12V/1.5A, Type-C output profiles up to 12V/1.67A, and USB-A output profiles up to 10V/2.25A or 12V/1.5A. These figures describe listed voltage/current combinations; they do not by themselves confirm a named charging protocol, device compatibility, or combined multi-port output. Request a protocol list, port-by-port test data, thermal results, and simultaneous-output rules for the approved configuration.
Enclosure, Metallic Finish, and Color Approval
AJ26 is listed with fire-resistant PVC and is shown in metallic black, metallic gray, and white. Procurement teams should request the exact resin grade, applicable flame-rating evidence, coating or surface-treatment specification, color standard, adhesion and abrasion test method, and signed color sample. The term “fire-resistant” should be supported by the agreed material record and relevant test documentation.
OEM- und ODM-Mengenstaffeln
- 500 Stück: entry order tier for quotation and project review.
- 1.000 Stück: planning tier for a confirmed color, branding, and packaging scope.
- 2.000 Stück: volume tier for production and delivery planning.
Logo, color, packaging, screen or firmware requirements, tooling, samples, pricing, lead time, and compliance documentation must be confirmed in the written quotation and approved production specification. Availability is project-dependent.
Prüfcheckliste für B2B-Einkäufer
- Confirm rated energy, usable capacity test method, battery designation, cell supplier, and lot-traceability requirements.
- Approve the TFT screen content, accuracy, firmware behavior, brightness, and standby logic on a production-intent sample.
- Request the supported protocol list plus single-port and simultaneous-output test reports.
- Verify material grade, flame-rating evidence, coating durability, color standard, dimensions, and production tolerances.
- Define logo, packaging, labeling, manuals, certification scope, inspection criteria, warranty terms, and shipment schedule in writing.
AJ26 Product Images
Häufig gestellte Fragen: AJ26 TFT Screen Power Bank
1. What specifications are currently published for the AJ26?
The AJ26 table lists 10000mAh at 3.85V, a 263376 battery designation, dimensions of 97.5 × 40.1 × 31mm, fire-resistant PVC, Type-C input profiles up to 12V/1.5A, Type-C output profiles up to 12V/1.67A, USB-A output profiles up to 10V/2.25A, and metallic black, metallic gray, and white color options. The table does not define TFT size, displayed data, protocol certification, flame rating, coating process, or simultaneous-output performance.
2. What TFT screen information and accuracy should buyers verify?
The current specification identifies a TFT display but does not publish its size, resolution, displayed parameters, refresh interval, accuracy, calibration method, charging-mode logic, or firmware behavior. Buyers should request the display and controller specification, approved user interface, battery-state calculation method, accuracy and repeatability tests, sample video, firmware version, and confirmation of which values are measured and which are calculated.
3. What battery and capacity evidence should AJ26 buyers request?
The 263376 designation and 10000mAh figure do not by themselves establish cell construction, usable output energy, conversion efficiency, recharge time, cycle life, or production consistency. Buyers should request the cell manufacturer and model, cell datasheet, battery configuration, nominal voltage and watt-hours, charge and discharge energy curves, conversion-efficiency data, cycle and aging test conditions, protection specification, and lot-level capacity inspection records.
4. What does the published fire-resistant PVC material require buyers to verify?
The phrase fire-resistant PVC does not establish a specific UL 94 rating, test thickness, supplier grade, chemical resistance, or compliance scope. Buyers should request the exact material manufacturer and grade, material datasheet, flame-test report with specimen thickness and result, restricted-substance declarations, incoming-material controls, and confirmation that the tested resin, colorant, coating, and final enclosure match the production configuration.
5. What metallic-finish durability evidence should buyers request?
The table lists metallic black, metallic gray, and white colors but does not identify the coating process, layer structure, adhesion, abrasion resistance, fingerprint resistance, chemical resistance, color tolerance, or aging performance. Buyers should request the approved finish specification and samples, coating supplier and process, adhesion and abrasion tests, chemical and UV aging results, color-difference limits, cosmetic inspection standard, and production sample approval.
6. What simultaneous-output, protocol, and thermal behavior should buyers verify?
The Type-C and USB-A voltage-current profiles describe individual outputs, not the power available when both ports are used together. They also do not prove named charging protocols or device-specific speeds. Buyers should request the controller specification, supported protocol matrix and negotiation logs, simultaneous-output matrix, shared-power limit, port priority, temperature-rise and abnormal-operation tests, protection thresholds, and tests for every required charger and device combination.
7. What OEM and ODM options are available for the AJ26?
Standard OEM service starts at 500 pieces for logo and packaging on the existing AJ26 platform. Light customization, such as an approved housing color, finish, documentation, display presentation, or packaging change, generally starts at 1,000 pieces. Changes to the battery, PCBA, firmware, display hardware, user interface, charging controller, coating system, thermal design, dimensions, or enclosure are deeper ODM work and generally start at 2,000 pieces. Final MOQ, samples, colors, tooling, lead time, compatibility, labeling, and certification scope must be confirmed in the quotation.
Rezensionen
Es gibt noch keine Rezensionen.