- \n
- Ver\u00f6ffentlichte Batteriedaten:<\/strong> 10000mAh \/ 38.5Wh \/ 3.85V.<\/li>\n
- Published body data:<\/strong> 106.3 \u00d7 64.5 \u00d7 20.5mm and 210g.<\/li>\n
- Wireless modes:<\/strong> 5W, 7.5W, 10W and 15W.<\/li>\n
- Wired paths:<\/strong> separate Type-C port plus a built-in Type-C cable for listed input and output profiles.<\/li>\n
- Published total output:<\/strong> 20W maximum, subject to an approved allocation matrix.<\/li>\n
- OEM-Bestellmengen:<\/strong> 500, 1.000 und 2.000 St\u00fcck, abh\u00e4ngig vom Angebot und vom Projektumfang.<\/li>\n<\/ul>\n
Ver\u00f6ffentlichte technische Spezifikationen<\/h2>\n
\n\n
\n \nSpezifikation<\/th>\n Published AJ43 Data<\/th>\n<\/tr>\n<\/thead>\n \n Artikelnummer<\/td>\n AJ43 Power Bank<\/td>\n<\/tr>\n \n Capacity<\/td>\n 10000mAh \/ 38.5Wh \/ 3.85V<\/td>\n<\/tr>\n \n Abmessungen<\/td>\n 106.3 \u00d7 64.5 \u00d7 20.5mm<\/td>\n<\/tr>\n \n Weight<\/td>\n 210g<\/td>\n<\/tr>\n \n Ver\u00f6ffentlichte Materialangabe<\/td>\n PV+ABS<\/td>\n<\/tr>\n \n Type-C Input<\/td>\n 5V\/3A, 9V\/2A, 12V\/1.5A<\/td>\n<\/tr>\n \n Type-C Output<\/td>\n 5V\/3A, 9V\/2.22A, 10V\/2.25A, 12V\/1.67A<\/td>\n<\/tr>\n \n Type-C Cable Input<\/td>\n 5V\/3A, 9V\/2A, 12V\/1.5A<\/td>\n<\/tr>\n \n Type-C-Kabelausgang<\/td>\n 5V\/3A, 9V\/2.22A, 10V\/2.25A, 12V\/1.67A<\/td>\n<\/tr>\n \n Wireless Output<\/td>\n 5W \/ 7.5W \/ 10W \/ 15W; total output 20W max<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n These are published model figures, not a substitute for the buyer-approved datasheet or test evidence. Confirm cell configuration, rated capacity, usable energy, protocols, wireless implementation, magnet system, material grade, dimensions, weight, output allocation, test conditions and final labels before quotation, mass production or compliance use.<\/em><\/p>\n
Magnetic Wireless Charging Verification<\/h2>\n
The published 5W, 7.5W, 10W and 15W levels do not by themselves prove Qi or MagSafe certification, a particular magnet grade, universal device or case compatibility, fixed 15W performance, alignment tolerance or holding force. Buyers should request the wireless controller specification, supported profile matrix, coil and magnet drawings, alignment and pull-force tests, foreign-object and abnormal-operation protection data, case-thickness limits, efficiency and temperature-rise results, and tests using the exact target phones and cases.<\/p>\n
Built-In Type-C Cable and Separate Port<\/h2>\n
The table lists matching input and output profile sets for the built-in cable and separate Type-C port, but this does not establish direction switching, named protocols, cable replaceability, simultaneous use or device-specific charging speed. Buyers should request controller and wiring diagrams, protocol analyzer logs, source and sink matrices, cable capability data, bend and pull tests, storage and retention tests, repeated-use results, protection thresholds and tests with approved chargers and target devices.<\/p>\n
20W Total Output and Shared-Load Testing<\/h2>\n
The specification states 20W maximum total output but does not publish a verified allocation matrix for wireless output, the built-in cable and the Type-C port. Buyers should request tests for every required combination, including total and per-output power, voltage stability, protocol behavior, priority logic, temperature rise, protection response and whether an output is reduced or disabled when another load is active. Marketing should distinguish total system output from the maximum profile of an individual wired or wireless path.<\/p>\n
Capacity, Housing, Thermal and Physical Evidence<\/h2>\n
The page lists 10000mAh, 38.5Wh, 106.3 \u00d7 64.5 \u00d7 20.5mm, 210g and material described as PV+ABS. These figures do not prove usable output, a fixed number of device charges, an exact polymer composition, flame rating, heat resistance or a fixed surface temperature. Buyers should request the cell datasheet, discharge and conversion-efficiency tests, measured samples, clarification of the PV designation, the exact material declaration, flammability and mechanical evidence where required, battery and charging temperature-rise data, drop and vibration results, cosmetic aging tests and lot-level inspection criteria.<\/p>\n
OEM- und ODM-Mengenstaffeln<\/h2>\n
- \n
- 500 St\u00fcck:<\/strong> standard OEM logo and packaging on the existing AJ43 platform.<\/li>\n
- 1.000 St\u00fcck:<\/strong> Projektpr\u00fcfung f\u00fcr eine freigegebene Geh\u00e4usefarbe oder \u00c4nderungen an Dokumentation, Verpackung oder Kabeloberfl\u00e4che.<\/li>\n
- 2.000 St\u00fcck:<\/strong> deeper ODM review involving the wireless module, magnet system, battery, PCBA, firmware, thermal design, built-in cable system or enclosure.<\/li>\n<\/ul>\n
Final MOQ, colors, samples, tooling, pricing, lead time, compatibility, labeling, certification scope, warranty, package contents and inspection criteria must be confirmed in the quotation and approved production specification.<\/p>\n
Pr\u00fcfcheckliste f\u00fcr B2B-Eink\u00e4ufer<\/h2>\n
- \n
- Confirm cell data, 38.5Wh energy, usable-output method, conversion efficiency and lot-level capacity controls.<\/li>\n
- Request wireless controller, coil, magnet, alignment, pull-force, case, protection and temperature evidence.<\/li>\n
- Verify Type-C port and cable input\/output profiles with protocol logs, charger tests and target-device tests.<\/li>\n
- Approve the 20W total-output matrix, allocation logic, voltage stability, shared-load behavior and thermal limits.<\/li>\n
- Request cable bend, pull, storage, retention and repeated-use tests for the production configuration.<\/li>\n
- Confirm the exact material grade, dimensions, weight, labels, manuals, accessories, compliance scope, warranty and inspection criteria.<\/li>\n<\/ul>\n
AJ43 Product Images<\/h2>\n
![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis01.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis02.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis03.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis04.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis05.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis06.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis07.webp\")
<\/div>\n![\"AJ43](\"https:\/\/www.yulidapower.com\/wp-content\/uploads\/2026\/07\/aj43-power-dis08.webp\")
<\/div>\nH\u00e4ufig gestellte Fragen: AJ43 Magnetische kabellose Powerbank<\/h2>\n
\n1. What specifications are confirmed for the AJ43?<\/h3>\n
The published AJ43 specification lists 10000mAh, 38.5Wh at 3.85V, a 106.3 \u00d7 64.5 \u00d7 20.5mm body, 210g weight, PV+ABS material, Type-C port and built-in cable input profiles up to 12V\/1.5A, output profiles up to 10V\/2.25A or 12V\/1.67A, wireless output levels at 5W, 7.5W, 10W and 15W, and total output stated as 20W maximum. Final cell configuration, protocols, materials, labeling and output behavior should be confirmed on the approved production datasheet.<\/p>\n<\/div>\n
\n2. Can the AJ43 wireless output, built-in cable, and Type-C port operate simultaneously?<\/h3>\n
The specification states a 20W maximum total output, but it does not publish a verified simultaneous-output matrix, per-output allocation, priority logic or protocol behavior under multiple loads. Buyers should request tests for every required wireless-and-wired combination, including total and per-output power, voltage stability, temperature rise, protection response and whether any output is reduced or disabled when another output is active.<\/p>\n<\/div>\n
\n3. What does the AJ43 built-in Type-C cable support?<\/h3>\n
The table lists both input and output profiles for the built-in Type-C cable, indicating that it is intended for recharging the power bank and supplying power to a connected device. However, connector wiring, direction switching, protocol support, cable durability, replaceability, bend-cycle life and behavior while other outputs are active are not established by the voltage table alone. Buyers should verify these points on the approved sample and technical file.<\/p>\n<\/div>\n
\n4. What should buyers verify about the AJ43 PV+ABS housing?<\/h3>\n
The page lists the material as PV+ABS, but this designation alone does not establish the exact polymer composition, flammability grade, heat resistance, UV stability, impact strength, surface temperature, fingerprint resistance or long-term appearance. Buyers should request the material specification and supplier declaration, clarify the PV designation, and review flammability, mechanical, cosmetic, temperature-rise, aging and color-consistency evidence where required.<\/p>\n<\/div>\n
\n5. What wireless compatibility evidence should AJ43 buyers request?<\/h3>\n
Published 5W, 7.5W, 10W and 15W output levels do not by themselves prove a named wireless protocol, platform certification, universal device compatibility, magnetic alignment standard or device-specific charging speed. Buyers should request the wireless module specification, applicable certification evidence, coil and magnet layout, alignment tolerance, foreign-object detection, case-thickness limits, efficiency and temperature-rise data, and test results for the exact target devices.<\/p>\n<\/div>\n
\n6. What does the AJ43 10V\/2.25A output profile mean?<\/h3>\n
The 10V\/2.25A profile is listed for the Type-C port and built-in cable, but the voltage and current values alone do not prove a named fast-charging protocol or compatibility with a particular phone brand. Buyers should request the controller and protocol specification, negotiation logs, supported profile matrix, cable capability, protection behavior and tests with the exact target devices before advertising a protocol name or device-specific charging speed.<\/p>\n<\/div>\n
\n7. What OEM and ODM options are available for the AJ43?<\/h3>\n
Standard OEM service starts at 500 pieces for logo and packaging on the existing AJ43 platform. Light customization, such as an approved housing color, documentation, packaging or cable-finish change, generally starts at 1000 pieces. Wireless module, magnet system, battery, PCBA, firmware, thermal design, built-in cable system or enclosure changes are deeper ODM work and generally start at 2000 pieces. Final MOQ, colors, samples, tooling, lead time, compatibility, labeling and certification scope must be confirmed in the quotation.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"
10000mAh Magnetic Wireless Platform<\/strong> – Published data lists 38.5Wh at 3.85V, a 106.3 x 64.5 x 20.5mm body, 210g weight and PV+ABS material.<\/p>\n
Built-In Type-C Cable and Port<\/strong> – Both paths list input profiles up to 12V\/1.5A and output profiles up to 10V\/2.25A or 12V\/1.67A. Protocols require verification.<\/p>\n
Published Wireless Modes<\/strong> – The table lists 5W, 7.5W, 10W and 15W wireless modes with 20W maximum total output. OEM MOQ starts at 500 pieces.<\/p>","protected":false},"featured_media":16612,"comment_status":"open","ping_status":"closed","template":"","meta":{"om_disable_all_campaigns":false},"product_brand":[],"product_cat":[99,42,55,94],"product_tag":[],"class_list":["post-16624","product","type-product","status-publish","has-post-thumbnail","product_cat-magnetic-wireless-power-bank","product_cat-power-bank","product_cat-power-bank-with-built-in-cable","product_cat-wireless-power-bank","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/product\/16624","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/comments?post=16624"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/media\/16612"}],"wp:attachment":[{"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/media?parent=16624"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/product_brand?post=16624"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/product_cat?post=16624"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.yulidapower.com\/de\/wp-json\/wp\/v2\/product_tag?post=16624"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
- 1.000 St\u00fcck:<\/strong> Projektpr\u00fcfung f\u00fcr eine freigegebene Geh\u00e4usefarbe oder \u00c4nderungen an Dokumentation, Verpackung oder Kabeloberfl\u00e4che.<\/li>\n
- Published body data:<\/strong> 106.3 \u00d7 64.5 \u00d7 20.5mm and 210g.<\/li>\n