Description
AJ24 Power Bank
| Item No.: | AJ24 Power Bank |
| Capacity: | 5000mAh / 19.25Wh / 3.85V |
| Battery: | 115252*1pcs |
| Size / Weight: | 98.5*63.5*22mm / 50.5g |
| Material: | ABS + PC |
| AC Power Input: | 110-240V 50-60Hz 10W |
| Type-C Input: | 5V/3A |
| Type-C Output: | 5V/3A |
| Type-C Cable Output: | 5V/3A |
| Color: | Black / White |
AJ24 sourcing summary: The published specification describes a compact power bank with 5000mAh / 19.25Wh capacity, 110–240V 50–60Hz 10W AC input, a Type-C input/output port, and a built-in Type-C cable output. Each Type-C profile is listed at 5V/3A. The table also lists a 98.5 × 63.5 × 22mm ABS + PC body, a stated weight of 50.5g, and black or white color options.
What B2B buyers should verify before ordering
- Regional AC compliance: confirm plug geometry, country-specific approvals, insulation, temperature rise, leakage current, dielectric strength, markings, and production testing.
- Charging behavior: request separate test matrices for AC recharge, Type-C input, Type-C port output, built-in cable output, and any simultaneous-use condition.
- Battery evidence: verify cell supplier and model, usable output energy, conversion efficiency, recharge time, cycle conditions, protection thresholds, and lot inspection.
- Mechanical reliability: define folding-plug cycle, insertion and withdrawal force, cable bend and pull tests, drop tests, contact resistance, and post-test safety checks.
- Claim control: do not market pass-through charging, universal protocol support, country compatibility, charging time, device-specific speed, or certification until evidence for the production configuration is approved.
OEM and ODM planning
Standard logo and packaging OEM orders start at 500 pieces. Approved light customization generally starts at 1,000 pieces, while deeper changes to the battery, PCBA, AC stage, plug system, cable, charging controller, thermal design, dimensions, or enclosure generally start at 2,000 pieces. Final MOQ, samples, tooling, lead time, target markets, labeling, packaging, compatibility, and certification scope must be confirmed in the quotation.
AJ24 Product Images
Frequently Asked Questions: AJ24 AC Plug Power Bank with Type-C Cable
1. What specifications are currently published for the AJ24?
The AJ24 table lists 5000mAh / 19.25Wh at 3.85V, one 115252 battery designation, dimensions of 98.5 × 63.5 × 22mm, a stated weight of 50.5g, ABS + PC material, 110–240V 50–60Hz 10W AC input, 5V/3A Type-C input, 5V/3A Type-C output, 5V/3A built-in Type-C cable output, and black or white colors. These values are published specifications, not proof of regional plug approval, charging time, protocol support, usable output energy, pass-through operation, or certification.
2. Does the 110–240V AC input make the AJ24 ready for every market?
No. The 110–240V 50–60Hz input range describes electrical input only. It does not establish the plug geometry, adapter availability, insulation system, creepage and clearance, leakage current, dielectric strength, temperature rise, flame performance, labeling, or regulatory approval required in a target market. Buyers should define every sales country and request the corresponding plug drawing, safety design file, test reports, certificates, markings, and production inspection plan.
3. Does the AJ24 support pass-through charging or operation as a wall charger?
The published table does not define pass-through charging, load sharing, power-path behavior, charging priority, switchover behavior, or the output available while the AC input is connected. Buyers should not assume these functions. Request a power-path block diagram, controller specification, operating matrix for AC input with each output, thermal and abnormal-operation test results, and samples tested with the intended devices before making any wall-charger or uninterrupted-charging claim.
4. What battery-capacity and recharge evidence should buyers request?
The published 5000mAh / 19.25Wh value and 115252 designation do not by themselves establish cell supplier, usable output energy, conversion efficiency, recharge time, cycle life, or lot consistency. Buyers should request the cell manufacturer and model, cell datasheet, battery configuration, charge and discharge energy curves, conversion-efficiency data, AC and Type-C recharge tests, cycle and aging conditions, protection specification, and lot-level capacity inspection records.
5. What do the 5V/3A Type-C ratings prove about charging performance?
The table lists 5V/3A for Type-C input, Type-C port output, and built-in Type-C cable output. This identifies a published voltage-current profile but does not prove named fast-charging protocols, 15W delivery to every device, simultaneous-output power, cable e-marker requirements, device-specific speed, or universal compatibility. Buyers should request the controller specification, protocol and negotiation logs, single- and multi-output matrices, voltage-drop data, cable test results, thermal tests, and validation with every required charger and device.
6. What durability and safety evidence is needed for the AC plug and built-in cable?
The current specification does not publish plug-blade material, hinge construction, insertion and withdrawal force, folding-cycle life, cable bend life, pull strength, contact resistance, corrosion resistance, or post-test electrical safety. Buyers should request controlled drawings, material specifications, plug cycling and retention tests, cable flex and pull tests, contact-resistance measurements, humidity and corrosion tests where relevant, drop testing, and dielectric, leakage-current, and temperature-rise checks before and after mechanical testing.
7. What OEM and ODM options are available for the AJ24?
Standard OEM service starts at 500 pieces for logo and packaging on the existing AJ24 platform. Light customization, such as an approved housing color, documentation, labeling, plug presentation, or packaging change, generally starts at 1,000 pieces. Changes to the battery, PCBA, AC power stage, plug system, cable, charging controller, thermal design, dimensions, or enclosure are deeper ODM work and generally start at 2,000 pieces. Final MOQ, samples, tooling, lead time, regional compliance, labeling, packaging, compatibility, and certification scope must be confirmed in the quotation.
Reviews
There are no reviews yet.