Description
J06 Slim Multi-Port Power Bank Overview
The YULIDA J06 is a 20000mAh power bank with a dedicated Type-C1 input, Type-C2 output and USB-A output. All published connections use 5V/2A profiles. It is positioned for OEM programs that need a straightforward 10W platform without unsupported fast-charge or device-runtime claims.
Verified J06 Specifications
| Item No. | J06 |
| Capacity | 20000mAh |
| Type-C1 input | 5V/2A |
| Type-C2 output | 5V/2A |
| USB-A port output | 5V/2A |
| Dimensions | 142 × 68.1 × 28mm |
| MOQ | 500 pieces |
Dedicated Type-C1 Input
Type-C1 is listed as the recharging input at 5V/2A. No higher-voltage input profile or recharge time is published. Buyers should test the intended charger and request a documented charge curve before making full-recharge-time claims.
Type-C2 and USB-A Outputs
Type-C2 and USB-A are each listed at 5V/2A, equivalent to 10W at the stated operating point. Named protocols, universal compatibility and device-specific charging speed are not stated.
Multi-Port Use Requires Verification
The product has two output connections, but simultaneous-output allocation, combined total power and pass-through behavior are not published. Confirm required combinations and protection behavior on the approved sample.
20000mAh Capacity Boundaries
The published capacity is 20000mAh. Cell voltage, rated energy in Wh, usable output capacity and measured device-charge counts are not stated. Do not publish phone-charge counts or runtime estimates without controlled test data.
142 × 68.1 × 28mm Enclosure
The documented dimensions provide a basis for packaging and display planning. Weight, housing material and internal cell layout are not published and should be confirmed for the production configuration.
Suitable OEM Program Positioning
The simple 5V/2A platform can suit programs where documented basic output and multiple connector types are more important than higher-voltage charging profiles. Target-device compatibility, accessory contents and labeling should be approved before production.
OEM, ODM and MOQ Planning
Standard OEM logo and packaging programs start at 500 pieces. Light color, documentation or packaging changes can start at 1,000 pieces, subject to feasibility. Battery, PCBA, connector or structural ODM work generally starts at 2,000 pieces.
Frequently Asked Questions
What charging profiles are confirmed?
Type-C1 input, Type-C2 output and USB-A output are each listed at 5V/2A.
Which Type-C connection is the input?
Type-C1 is listed for input, while Type-C2 is listed for output.
Can both outputs be used at the same time?
The page does not publish a simultaneous-output matrix or combined power limit. Confirm this on the approved sample.
How many phone charges does 20000mAh provide?
No verified charge count is published. It depends on rated energy, conversion efficiency and the target device.
Is it suitable for low-power accessories?
The listed 5V/2A outputs may suit devices that accept that profile, but compatibility should be tested with the intended products.
How long does a full recharge take?
No verified recharge time is published. Request a charge curve using the intended charger and production battery pack.
What are the OEM and ODM order levels?
Standard OEM starts at 500 pieces, light customization can start at 1,000 pieces, and deeper ODM work generally starts at 2,000 pieces.
Reviews
There are no reviews yet.