AJ10 3-in-1 Power Bank 10000mAh with Built-in Cable | OEM

Description

AJ10 is a compact 3-in-1 power bank for OEM and wholesale projects. Its published specification combines a 10000mAh battery, two 21700 cells, a built-in Type-C cable, Type-C input/output, a Lightning output and a 3W watch output in a 93 × 50 × 32 mm housing.

AJ10 at a Glance

• Model: AJ10
• Published capacity: 10000mAh (2 × 21700 cells)
• Built-in cable: Type-C output with a listed maximum profile of 10V/2.25A (22.5W)
• Additional outputs: Type-C, Lightning and 3W watch output
• Size and weight: 93 × 50 × 32 mm; 209 g
• OEM/ODM MOQ: 500, 1000 or 2000 pieces depending on customization scope

Published Technical Specifications

Charging Interface Overview

The AJ10 specification lists Type-C input at 5V/3A, 9V/2A and 12V/1.5A. Type-C port output is listed at 5V/3A, 9V/2A and 12V/1.67A. The built-in Type-C cable adds 10V/2.25A to its published profiles, while the Lightning output is listed at 5V/2.4A and the watch output at 3W.

Charging power is negotiated by the connected device and can vary by device, cable implementation and simultaneous-use conditions. Buyers should validate the required phones, tablets and wearables on a production-representative sample.

OEM/ODM Sourcing Information

AJ10 is available for wholesale and OEM/ODM sourcing. MOQ starts at 500 pieces, with common project quantities of 500, 1000 and 2000 pieces. Logo, color, packaging and configuration availability should be written into the quotation and approved sample because the feasible scope varies by order quantity.

B2B Buyer Verification Checklist

• Confirm the final connector layout and included built-in cable.
• Test the required charging profiles and target-device compatibility.
• Approve battery, color, logo placement and packaging samples.
• Confirm combined-output behavior if several devices will be connected.
• Verify lead time, warranty terms, carton data and required market or transport documents.

AJ10 Product Images

Frequently Asked Questions about AJ10

1. What charging interfaces are listed for the AJ10?

The published AJ10 specification table lists a Type-C port for input and output, a Lightning output rated at 5V/2.4A, a 3W watch output, and a built-in Type-C cable output. Buyers should confirm the final connector layout and target-device compatibility on the approved sample.

2. What is the published capacity and battery configuration?

The published specification is 10000mAh using two 21700 cells. Cell brand, rated energy and usable output capacity should be confirmed in the order specification and pre-production sample.

3. What output is published for the built-in Type-C cable?

The listed Type-C cable output profiles are 5V/3A, 9V/2A, 10V/2.25A and 12V/1.67A. The highest listed profile equals 22.5W; actual charging power depends on the connected device, cable implementation and negotiated charging profile.

4. What are the AJ10 dimensions and weight?

The published dimensions are 93 × 50 × 32 mm and the listed weight is 209 g. For retail packaging and logistics calculations, buyers should verify the final sample and packed carton data.

5. Can the AJ10 charge several devices at the same time?

The product page lists multiple output options, but it does not publish a combined-output allocation table. Buyers planning multi-device use should confirm simultaneous-output behavior, total shared power and temperature performance on an approved sample.

6. What are the OEM/ODM order quantities for AJ10?

MOQ starts at 500 pieces. Typical project levels are 500, 1000 and 2000 pieces; available logo, color, packaging and configuration work depends on the quantity and approved quotation.

7. What should B2B buyers verify before placing an order?

Confirm the final connector layout, charging profiles, battery specification, target-device compatibility, logo and packaging files, sample approval, lead time, warranty terms and the certificates or transport documents required for the target market.