AJ08 Pro 10000mAh Magnetic Wireless Power Bank with Cable

Description

AJ08 Pro is a 10000mAh magnetic wireless power bank with a built-in Type-C cable, a separate Type-C port and USB-A output. Its published maximum output differs by interface: up to 15W wireless, 18W through the built-in cable, approximately 20W through the Type-C port and 22.5W through USB-A. Buyers should match each figure to the correct interface when comparing samples or preparing retail claims.

AJ08 Pro at a Glance

• Battery capacity: 10000mAh
• Wireless output: 5W / 7.5W / 10W / 15W
• Built-in Type-C cable: 5V/3A, 9V/2A, 12V/1.5A (18W maximum)
• AJ08 Pro input via Type-C: 5V/3A, 9V/2A (18W maximum)
• Type-C output: 5V/3A, 9V/2A, 12V/1.67A (approximately 20W maximum)
• AJ08 Pro output via USB-A: 5V/3A, 9V/2A, 10V/2.25A, 12V/1.5A (22.5W maximum)

Published Technical Specifications

Interface-Specific Charging Profiles

The 22.5W claim applies to the USB-A output in the published specification table. The built-in Type-C cable is rated up to 18W, while the separate Type-C output reaches approximately 20W from its listed 12V/1.67A profile. Actual charging power depends on the connected device, cable path, negotiated charging mode and test conditions. Protocol support should be confirmed on the approved production sample before it is printed on packaging.

15W Magnetic Wireless Charging

The round wireless area is specified for 5W, 7.5W, 10W and 15W output. For a private-label project, verify phone alignment, case thickness, coil position, magnetic holding force, temperature rise and foreign-object behavior with the intended device set. A 15W product-side rating does not mean every phone will receive 15W.

Built-in Type-C Cable and Cable Storage

The integrated Type-C cable provides a direct 18W wired path and stores along the product body when not in use. Buyers should approve cable length, connector fit, bend performance, pull resistance and storage retention on a physical sample. Confirm separately whether the cable is intended only for charging or also supports data transfer.

Multiple-Output Verification

AJ08 Pro provides magnetic wireless output, a built-in Type-C cable, a Type-C port and a USB-A port. The published table lists individual port profiles but does not provide a combined-output matrix. Before making simultaneous-charging claims, test each required port combination and record total power allocation, individual output, temperature and any automatic power reduction.

OEM and ODM Quantity Tiers

• 500 pcs: entry OEM projects using an approved base configuration, with logo and standard packaging scope confirmed by quotation.
• 1000 pcs: broader color, packaging and documentation requirements, subject to sample approval and production feasibility.
• 2000 pcs: deeper ODM evaluation involving the battery, cable, wireless module, PCBA, enclosure or firmware, subject to engineering review.

MOQ tiers describe project depth, not an automatic promise that every customization is included. Final price, sample cost, lead time and compliance scope depend on the approved specification.

B2B Buyer Verification Checklist

• Confirm the exact battery-cell configuration, rated energy and usable-output test method.
• Verify wireless output and magnetic alignment with the target device and case list.
• Test the built-in cable, Type-C port and USB-A port independently at every required voltage profile.
• Request a combined-output matrix if more than one output will be used at the same time.
• Approve cable durability, connector retention, housing color and logo position on a physical sample.
• Define the required market, transport documents, test reports, labeling and packaging before mass production.

AJ08 Pro Product Images