AJ05 Slim Wireless Power Bank 15W | 5K-10K mAh OEM

Frequently Asked Questions: AJ05 Slim Wireless Power Bank

1. What specifications are confirmed for the AJ05?

The published AJ05 specification lists 5000mAh and 10000mAh capacity options. The 5000mAh version is listed at 105 × 69 × 11mm and 115g, while the 10000mAh version is listed at 105 × 69 × 17mm and 190g. Type-C input profiles reach 9V/2A, Type-C output profiles reach 12V/1.67A, and wireless output levels are 5W, 7.5W, 10W, and 15W. Final cell configuration, rated energy, material, labeling, and port behavior should be confirmed for each production version.

2. How should buyers compare the 5000mAh and 10000mAh AJ05 versions?

The page confirms separate sizes and weights for the two capacities, but it does not publish measured usable output energy or target-device charge counts. Real delivered energy varies with cell voltage, conversion efficiency, wired or wireless loss, temperature, battery age, output power, and the target device’s charging behavior. Buyers should request the final cell and nameplate data, discharge-energy results, and device-charge tests with stated conditions for each version.

3. What is confirmed about AJ05 wireless charging?

The published specification lists wireless output levels of 5W, 7.5W, 10W, and 15W. It does not publish verified wireless-protocol certification, device-specific charging speed, magnetic alignment standard, magnet grade, holding force, or charging-time comparison between output levels. Buyers should request the wireless module specification, applicable certification evidence, coil and magnet layout, efficiency and temperature-rise data, foreign-object detection, alignment tolerance, and target-device test results.

4. What is confirmed about the AJ05 battery configuration?

The page associates a 126280 5000mAh battery with the AJ05, but it does not publish verified cell dimensions, chemistry details, supplier, energy-density comparison, cycle-life result, or the cell arrangement used for the 10000mAh version. Buyers should request the approved cell datasheet, rated energy, supplier and model traceability, cycle-test conditions, safety evidence, and pack construction for each capacity before publishing battery-life or reliability claims.

5. What should buyers verify for magnetic alignment and phone cases?

The current specification does not publish a case-thickness limit, magnet layout, magnet grade, holding force, alignment tolerance, or device-specific adhesion result. Case material, metal plates, accessories, coil position, and phone geometry can affect attachment and charging. Buyers should test the intended phones and cases, and should request pull-force, alignment, foreign-object-detection, efficiency, temperature, and drop-behavior results for the approved sample.

6. What thermal evidence should AJ05 buyers request?

The current specification does not publish internal thermal materials, sensor type, control thresholds, automatic power-reduction behavior, surface-temperature limits, or factory aging-test conditions. Buyers should request wired and wireless temperature-rise curves, sustained-load and cycling results, ambient test conditions, derating behavior, protection thresholds, abnormal-load testing, and reports for the final PCBA, battery, coil, magnets, and enclosure.

7. What OEM and ODM options are available for the AJ05?

Standard OEM service starts at 500 pieces for logo and packaging on the existing AJ05 platform. Light customization, such as an approved shell color, documentation, or packaging change, generally starts at 1,000 pieces. Wireless module, magnet system, battery, PCBA, firmware, thermal design, connector system, or structural changes are deeper ODM work and generally start at 2,000 pieces. Final MOQ, capacity option, color and packaging feasibility, samples, tooling, lead time, and certification scope must be confirmed in the quotation.